差異處

這裏顯示兩個版本的差異處。

--- squid [2017/01/07 16:29] – jz
+++ squid [2018/12/29 21:39] (目前版本) – jz
@@ 行 1: / 行 1: @@
-====== squid ======
+====== Squid ======
-===== install =====
+===== Install =====
-<code>
+<code bash>
 pkg install squid
+pkg install htdigest
 sysrc squid_enable="YES"
 </code>
-===== config =====
+===== Auth =====
+There are two ways to specify the password auth, ''htdigest'' or ''htpasswd''.
+**htdigest**
 ''/usr/local/etc/squid/squid.conf''
+<code>
+auth_param basic program /usr/local/libexec/squid/basic_ncsa_auth /usr/local/etc/squid/password
+auth_param basic realm proxy
+auth_param basic casesensitive
+</code>
+<code bash>
+apache-htdigest -c /usr/local/etc/squid/password realm username
+# or htdigest if apache-htdigest is not found
+</code>
+<code bash>
+php -a
+echo 'user': . crypt('password', base64_encode('password'));
+</code>
+**htpasswd**
+''/usr/local/etc/squid/squid.conf''
 <code>
 auth_param digest realm proxy
 auth_param digest program /usr/local/libexec/squid/digest_file_auth -c /usr/local/etc/squid/password
-acl users proxy_auth REQUIRED
+</code>
-http_access allow users
-http_port 3128
-# Leave coredumps in the first cache dir
-coredump_dir /var/squid/cache
-#
+<code bash>
-# Add any of your own refresh_pattern entries above these.
+htpasswd -c /usr/local/etc/squid/password username
-#
-refresh_pattern ^ftp:		1440	20%	10080
-refresh_pattern ^gopher:	1440	0%	1440
-refresh_pattern -i (/cgi-bin/|\?) 0	0%	0
-refresh_pattern .		0	20%	4320
 </code>
+===== ACL =====
+''/usr/local/etc/squid/squid.conf''
 <code>
-apache-htdigest -c /usr/local/etc/squid/passwords realm username
+acl users proxy_auth REQUIRED
-# or htdigest
+acl ncku src 140.116.0.0/16
+http_access deny !ncku
+http_access allow users
+http_port 3128
 </code>
-===== check config =====
+===== Check config =====
-<code>
+<code bash>
 squid -f /usr/local/etc/squid/squid.conf -k parse
 </code>
+===== Start service =====
+<code bash>
+service squid start
+</code>